Electronics

Non- Microprocessor Based for Heavy Duty Industrial Purpose.

Instant Auto Selection of Cutting Length with thumbwheel Switch without any Restart or Shutdown.

Provided with loopback Cutting, W channel Shifting & BYPASS of END PIECE from your T.M.T. BOX.

Controlling your ROTARY Shear and T.M.T. Flying Shear System.

DOUBLE Fuse Protection for HMD (Sensor) and Auto Cut System (Control Panel).

With our AUTOMATIC Control Systems, while eliminating traditional manual cutting, IT IS AN ULTIMATE COST AND SCRAP SAVER SYSTEM.

HOT METAL DETECTOR are specially designed to give long and failure free operation in harsh industrial environment and are absolutely maintenance free. It contains no moving parts and is made of quality and tested electronic components totally sealed to the protection class of IP – 65.

Operating Principle

The infrared radiation, received through the lens system, is transmitted to an IR detector. When the radiation exceeds trigger point, the electrical switching output is activated. The Hot Metal Detector electronic circuitry compensates for ambient temperature changes and component aging. Adjustment is therefore not necessary, thus providing higher operational safety and reliability.

Design Features

Hot Metal Detector are rugged infrared switches completely epoxy resin encapsulated in stainless steel housings. Hot Metal Detector designed to be impervious to the effects of steam, water, dust, shock, vibration and oily conditions associated with heavy industrial environments. They are temperature compensated for extreme ambient temperature conditions. The hot metal detector are designed to serve and operate anything from 300°c to 1200°c, however distance adjustments is required for each case so as to obtain proper IR radiations.

Application

The hot metal detector is an infrared switch especially designed for fault-free operation in the harsh environments of heavy industry. For more than 15 years HMD have been successfully installed to monitor hot products in:

ROLLING MILLS

To control cut to length shearing, monitor hot rods, controlling roller tables, coil regulating, switching in crosscut hauler, monitor de-sealer, cooling beds, winder control, monitor edge washing, continuous Casting or tracking of high speed wire.

Blast Furnaces General Industry

To monitor waste wherever infrared radiation requires a reliable signal.

GENERAL SPECIFICATIONS
SUPPLY VOLTAGE	24 VDC
POWER INDICATION	RED LED
FUNCTION INDICATION	GREEN LED
OUTPUT	Relay Output (SPNO) 24 VDC
VIEWING ANGLE	7°
	-20°C to +60°C without air cooling
OPERATING TEMPERATURE	-20°C to +70°C with air cooling
	+2°C to +80°C with (20°C ) water cooling

TERMINAL CONNECTIONS
PIN NO	WIRE COLOUR	FUNCTION
1	RED	24VDC Supply
2	BLACK	Ground
3	GREEN	Relay Output 24 VDC